TANDEM AXLE FLAT DECK TRAILER
• I-Beam Deck-Over 20-Foot White Oak Platform Deck
• Hot-Dip Galvanized Trailer Frame
• Lockable Galvanized Toolbox Built-Into Tongue
• Dual (2) 7000 lb. capacity Dexter Axles with Forged Spindles and Electric Brakes
• Tandem Leaf Spring Suspension, Deck Height 355” Above Ground
• 235/80R-16E 10-Ply Tires, 4-each on 8-Bolt Painted Steel Wheels
• One (1) Spare Tire and Rim, 235/80R-16E 10-Ply
• Galvanized I-Beam Tongue with 2.5-inch Adjustable Lunette eye Pintle Hitch
• Hitch is 40,000 lb. capacity with two (2) .375” Galvanized Safety Chains
• 14,000 lb. capacity 12-volt Electric Powered Hydraulic Tongue Jack
• Two (2) 7000 lb. capacity 12V Electric Motorized Up-Down Stabilizer Rear Jacks
• LED DOT Lighting and 7-Pole RV Style Trailer Connection
• Rear Mud flaps with Galvanized Brackets
• Deck Platform Lines with 12-gauge Stainless Steel with Non-Slip “Grip” at Step Surfaces
• Pull-0ut Intermediate Step-Platform at Rear Underside of Trailer Deck
• Red-White DOT Reflective Trailer Platform Perimeter Striping
• Two (2) Stainless Steel Full-Perimeter 265-Gallon Tote Cradles with Ratchet Retainer Straps

ACCUMAX-90 SINGLE-POINT FLOW-BASED FOAM PROPORTIONING SYSTEM
• 90-GPM @ 300-PSI Concentrate Flow System with:
• FoamPRO AccuMax Digital Electronic Control
• Foam Concentrate Line Assembly (FLI) Injection System
• Magnetic Concentrate Flow Meter
• Paddlewheel Water Flow Meter
• Master Electronic Driver
• Hydraulic Pump System: Pump, Oil Cooler, Hydraulic Motor, and Hydraulic Reservoir
• Bronze Rotary Gear Positive-Displacement Trident Foam Concentrate Pump
• One (1) 12-Inch Diameter Schedule-40 Stainless Steel Waterway, with:
• Four (4) 5” NSTM Inlet Ports with Stainless Steel Strainers
• Four (4) TFT Jumbo Ball Intake Gate Valves, Crank Controlled, Intake Relief Valves
• Four (4) 5” Storz Intake Adapters with Caps and Cable Restraint
• Four (4) TFT Jumbo Ball Outlet Gate Valves, Crank Controlled
• Four (4) 5” Storz Outlet Adapters with Caps and Cable Restraint
• One (1) 5” I.D. Stainless Steel Vertical Monitor Riser Pipe, Outlet Flanged 5” ASA
• One (1) Akron AeroMaster12 3200-GPM 12V Remote Electronically Controlled Monitor
• One (1) 5” Butterfly Style 12V Remote Controlled Monitor Discharge Gate Valve
CONCENTRATE SUCTION HOSE REELS
• Two (2) Hannay Mechanical Rewind Aluminum Hose Reels
• Each Reel equipped with Reel Intake 90-degree 2-1/2” Swivel Joints
• Each Reel equipped with Reel 2-1/2” NSTM Discharge Risers
• Each Reel equipped with 25-feet (50-feet total) of 2-1/2” “clear jacket” 2-1/2” Suction Hose
• Two (2) Chrome Spool and Stainless Roller Assemblies
• Two (2) 2-1/2” Bronze Ball Style Suction Gate Valves, 12V Electric Remotely Controlled
• Two (2) 2-1/2” Bronze One-Way Suction Check Valves
• 3-Inch Inline Cleanable Concentrate Strainer

ELECTRICAL SYSTEMS, 120-VOLT & LINE VOLTAGE
• Two (2) 12-VOLT Optima Spiral-Cell Automotive Storage Batteries:
• Weatherproof 7-Position Flat Pin Trailer Connector
• LED Stop, Turn, and Brake Light Fixtures
• Cole Hersee 300-Amp 2-Position Master Battery Cut-Off Switch
• Battery-On Indicator LED Light
• Power Max 15-Amp output/120-Volt input Fully Automatic Battery Charger
• 120-Volt Manual Recessed Shore Plug with Weatherproof Cover
• Two (2) LED Adjustable Work Lights, Switched on Console
• Four (4) each, LED Under Deck Ground Lights, 2-each side 1-ahead/1-behind Tandems
• Operator’s Control Console LED Lighting
• Foam Concentrate Delivery System Stainless Steel Fabricated Control Pedestal:
• Horizontally Hinged Lift-Up Lid/Cover, Weather-stripped
• Two (2) Twist-to-Lock Swing-Away Lid Latches
• Two (2) Air Assist Cover Props, to Hold Lid in Opened Position
• Pedestal Rear Vertical Surface to have Removable Insert with Trigger Latches
• Electronics Enclosure Located within the Control Pedestal