Factory Floor

FOAM 3 INDUSTRIAL FOAM PUMPER TENDER HS-5978

Custom built for the Refinery Terminal Company (RTFC) — Corpus Christi, TX

Bulletpoint Specs

Truck Type: FOAM-3 INDUSTRIAL PUMPER

Chassis Model

INDUSTRIAL FOAM PUMPER-TENDER: CUSTOM MONARCH CHASSIS  

  • 100,000 psi 2-Channel Tandem Chassis Frame Rails, Domex Coated, 253” Wheelbase, Tow Eyes below Bumper
  • Cummins ISX-15, 600 HP Diesel Engine, with Jacobs Engine Brake, Primary and Secondary Fuel Filters
  • Top Air Intake with Ember Separator, Emergency Engine Shut-Down w/Reset
  • Ross TAS-85 Power Steering, Spicer SPL250 Severe Capacity Driveline, Tandem
  • Allison GEN-5 EVS4000 Automatic Transmission, Touch-Pad Shifter, Transmission Cooler, TRANSYND Fluid
  • Radiator Cooling Pressurized System for ISX15, Coolant Recovery, Fan Clutch, and Fire Pump Heat Exchanger
  • 100-Gallon Stainless Steel Fuel Tank, Fuel Cooler, Remote Vented Fuel Fill, DEF Tank with Access Door
  • 420-Amp Delco-Remy Alternator, six (6) Type 31 MHD Interstate 12-volt Batteries
  • Dana EFA245T, 25,500 lb. capacity Tubular Front Axle, Enhanced 25,500 lb. Front Suspension
  • Goodyear 445/65R22.5 G296A Front Tubeless Front Tires, 6” Front Meritor Cam Air Brakes
  • Meritor RT-60-180, 58,000 lb. capacity 68-MPH Tandem Rear Axles, with Driver-Controlled Differential Lock
  • Raydan 58,000 lb. capacity Air-Ride Rear Suspension, 7” Rear Meritor Cam Air Brakes
  • Goodyear 315/80R22.5 G670 Highway Tread Tubeless Tires, 10-Tire Pressure Monitoring System
  • Alcoa Aluminum Polished Wheels, sized for 58,000 lb. Rear WR, 25,500 lb. Front WR, Hub & Lug Nut Covers
  • Air Brake System WABCO 6-Tanks, 1200 Air Dryer, 6-Channel Anti-Lock, Electronic Stability Control System
  • 98” wide x 141” long (73” aft) 4-Door, 15” Raised Roof Custom Chassis Cab, w/Structural Integrity Certification
  • 3/16” thick aluminum cab construction Hydraulic “Full-Tilt”, Manual Back-up, underside box tube sub-frame
  • Full Length Cab Doors, Manual Roll-Down Door Windows, Four (4) Auxiliary Cab Treadplate Aluminum Steps
  • Mid-Cab Side Sliding Windows, Synchronized-Intermittent Windshield Wipers,
  • Knurled Stainless Handrails: 4-Exterior Cab Sides w/Coat Hooks, Below Windshield, Interior Front & Rear Doors
  • Lang Merka 300-series Heated & Remote-Controlled Door Mounted Mirrors, Mirror Finish Stainless Front Grille
  • Front Bumper, Wrap-Around Polished Stainless Steel, Extended 24-inches ahead of Cab w/4-way Gravel Shield
  • Full Width Storage Well w/3-Deep Compartments, 1” Perimeter Lip and Hinged 2” High 4-way Aluminum Lid
  • Dual Grover 2040 Rectangular Air Horns Inboard Bumper, Activated Steering Wheel Button & Officer Dash
  • Whelen 295HFS2 Electronic Siren/PA, Two (2) Cast Products SA4201-68-A Electronic Speakers Inboard Grille
  • Federal Q2-B Flush Grille Mounted Mechanical Siren, Activated Officer Dash
  • LED Front Headlights, Recessed into Combination Headlight/Emergency Light Stainless-Steel Housings
  • Whelen 400-series LED Front Turn Lights, 500-series LED Cornering Lights, Headlights Alternating Flasher
  • Cab Exterior: Mirror Finish Stainless Steel Scuff Plates. Aluminum Treadplate Rear Cab Wall
  • Cab Interior: Brushed Stainless Steel Interior Door Panels, Multispec Gray Speckle Paint, Gray Rubberized Floor
  • Full Size Engine Enclosure for ISX15, Scorpion Black Urethane Coated, Top Center Console w/Map Book Storage
  • 12-Volt Electrical System Hard-Wired, Door Ajar Warning Light in Cab, High-Idle Switch, Multiple Power Points
  • Vehicle Date Recorder, Accessory Fuse/CB Panel, Power & Ground Studs, Interior Clear/Red Ceiling Lights
  • Severe Climate Heater, Air Conditioning, Defrosters with Full Windshield Ductwork
  • Air Ride Driver Bucket Seat, Air Ride Officer SCBA Bucket Seat, Three (3) Crew SCBA Fixed Bucket Seats
  • Bostrom Secure-All SCBA Seat Brackets, 4-each, Seat Belt Warning System, Rolltek Side Curtain Airbags
  • Mid-Cab Interior Overhead Storage Cabinet with Lift-Up Doors D-Ring Latches, for 15” Raised Roof
  • Rear-Cab Back Wall Full Height Cabinets, each side and overhead of Center Crew Seat
  • Jensen Stereo HD AM/FM/WB Radio with CD Player, Multiple Front & Rear Ceiling Speakers
  • Special Lighting: Under-Cab Ground Lights, Whelen Freedom 14-LED Lightbar, Six (6) M6 LED Warning Lights
  • FRC Spectra 20,000 Lumens 2-each Upper Side Scene Lights, FRC Spectra 20,000 Lumens 1-each Brow Light
  • FRC MAX Vision Tank Level Gauge LED Lights, Driver and Officer Upper Rear Sides of Cab
  • Two-Tone Cab Paint with Special Break Line

 

INDUSTRIAL FOAM PUMPER-TENDER CHASSIS MODIFICATIONS

  • Accommodations for and Mounting of Cab Tilt Controls and Signage (Mid-Ship Control Module)
  • Shore Air Inlet/Outlet Couplers, Air Pressure Gauge, and Enclosure with Access Door (Mid-Ship Control Module)
  • Additional Air Tank Reservoir for High Capacity Air Primer System
  • Air Tank Bleed Panel with Manual Drain Valves and Tubing for Seven (7) Air Tanks
  • Engine Exhaust Outlet Configured for Plymovent Exhaust Extraction System
  • Remote Stainless-Steel Fuel Fill Cubby Body Rear Wheelwell Housing with Access Door
  • Chassis Spicer Driveline Modifications to Accommodate Mid-Ship Fire Pump Split-Shaft Transmission
  • Hot-Shift PTO with Spicer Driveline extending to Power Foam System Remote Mounted Hydraulic Pump

 

INDUSTRIAL FOAM PUMPER-TENDER: REAR PUMP MODULE AND MID-SHIP CONTROL MODULE

  • Waterous CRU-2 4000-GPM Rear-Mounted Fire Pump with Inducer Impeller
  • Waterous TC-21 Chain Style Mid-Ship Mounted Fire Pump Split-Shaft Transmission
  • Pneumatic Fire Pump Shift with Remote Cab Controls and Mid-Mount Control Module Override
  • Master Rotary Pump Drain, Lift-Up Bleeders and Drains for Suctions, Discharges, and Foam Manifold
  • Two (2) Suction Manifold Pre-Set Bronze Intake Relief Valves
  • Electronic Engine Governor for Pump Pressure Control, w/Digital Engine Instrumentation
  • Stand-By Dual (2) Discharge Pressure Relief Valves w/Pressure Single Control and Stand-By Electronic Throttle
  • Auto Air-Prime System, Three (3) each 2-Barrel Venturi’s and an auxiliary air reservoir
  • Overheat Protection Manager, Pump Cooling System
  • Stainless Steel 12-inch Tubular Pump Suction Manifold with Three (3) Zinc Anodes
  • Three (3) 8-inch Pump Suction Intakes, reduced to 6-inch NST Male Fittings with Stainless Steel Strainers’
  • Three (3) TFT 12-volt Jumbo Ball Intake Valves, with Intake Relief Valves and Remote-Control Consoles
  • One (1) 2.5-inch Ball Gated Pump Suction Inlet
  • Water Tank-to-Pump Remote-Controlled Ball Gated Suction with one-way Check Valve, 500-GPM capability
  • 2-inch 12-volt Pump-to-Tank Ball Valve Gated Water Tank Refill, Remote-Controlled
  • Pump Cooling Discharge to Water Tank, Remote-Controlled 3/8-inch Solenoid Valve
  • Stainless Steel 10-inch Tubular Pump Discharge Manifold with Two (2) Zinc Anodes, Two (2) 8-inch Branches
  • Stainless Steel 10-inch Monitor Waterway with 8-inch 12-volt Butterfly Gate Valve, Remote-Controlled
  • Williams Ambassador 6000-GPM Hydra-Foam/Hydra-Chem Mid-Ship Monitor, Hydraulic Remote-Controlled
  • Two (2) 2.5-inch Foam Capable Discharges, 1-Driver & 1-Officer Side, 12-volt 3.5-inch Remote-Controlled Valves
  • Two (2) 5-inch Foam Capable Discharges, 1-Driver & 1-Officer Side, 12-volt 5-inch Remote-Controlled Valves
  • Two (2) 6-inch Foam Capable Discharges, 1-Driver & 1-Officer Side, 12-volt 6-inch Remote-Controlled Valves
  • Two (2) 1.5 NST Foam Capable Mid-Ship Speed-Lay Discharges, 12-volt 2.5-inch Remote-Controlled Valves
  • One (1) 2.5 NST Foam Capable Mid-Ship Speed-Lay Discharge, 12-volt 2.5-inch Remote-Controlled Valve
  • One (1) 2.5 NST Foam Capable Front Bumper Extension Discharge, 12-volt 2.5-inch Remote-Controlled Valve
  • AccuMax-3300, Electronically Controlled Multi-Point Direct-Injection, 300-GPM Foam System w/Low-Flow
  • Stainless Steel Foam Suction and Discharge Manifolds, 6-inch Stainless Steel Foam Concentrate Strainer
  • Line Control High-Pressure Hose Assemblies, Hydraulic Servo-Controlled Foam Pump Drive with Oil Cooler
  • Two (2) 3-inch Foam Pump Gated Suctions, 1-Driver & 1-Officer Side, 2.5-inch NST Swivel Female Fittings
  • 300-GPM Foam Tank-to-Foam Pump Ball Gated Suction, with Maintenance Blocking Valve
  • 300-GPM Foam Pump-to-Tank Fill with Maintenance Blocking Valve, Combo Offboard Gated Discharge
  • One (1) Master Control Display, Ten (10) Digital Line Control Displays, Manual Override, Low-Flow Option
  • Mid-Ship Top-Mount Pump Control Module, Dual Access Transverse Walkway with Operator’s Bench Seat
  • Transverse Stokes and Hose Bundle Compartments, Driver & Officer Side Equipment Compartments
  • Three (3) Transverse Speed-Lay Pre-Connect Hose Bed Cavities w/Removable Poly Cartridge Hose Beds
  • Full Width Rear-Facing Top-Mount Pump Control Console and Instrument Panel, Standby Controls Cubby
  • Digital and Analog Discharge Line Instruments/Gauges, Analog Master Suction and Duplex Foam/Water Gauges
  • Three (3) 12-volt Power Distribution Panels: 2- Rear Water & Foam Pumps, and 1-Mid-Ship Electronics
  • LED Water Tank Level Indicator, LED Foam Tank Level Indicator, Two (2) LED Strip Light Foam Level Light Fixtures
  • Diesel Fuel Level Gauge, Air Horn Switch, and Color-Coded Gauge Bezels and Control Name Plates

 

 

 

 

INDUSTRIAL FOAM PUMPER-TENDER: FOAM AND WATER TANKS

  • Poly 2400-Gallon Combination Foam/Water Tank, 2000-Gallons Foam and 400-Gallons Water Capacities
  • L-Shape Tank for Reduced Height Hose bed, Horizontal Sleeve Through Tank for 10-inch Monitor Waterway
  • One (1) 2.5-inch NST Swivel Female Gated Direct Foam Tank Bottom Fill, 12-volt 2.5-inch Remote-Controlled
  • Stainless Steel .5-inch Neoprene Rubber Lined Foam/Water Tank Cradle

 

INDUSTRIAL FOAM PUMPER-TENDER APPARATUS COMPARTMENTED BODY, TANDEM STYLE

  • Tandem Axle 3-Segment Pumper Tender Industrial Fire Apparatus Body, Compartmented with Hose Bed
  • Hose Bed Area, located To Rear of and Overhead the Foam/Water Tank, Aluminum Floor Gratings
  • Four (4) .250-inch Plate Aluminum Adjustable Hose Bed Dividers, with Laser-Cut Hand Holds
  • Double-Panel Natural Finish Brushed Stainless Steel Hose Bed Risers/Body Side Panels
  • Hose Bed Fall Arrest System with Six (6) Pivoting Slip-In Eyelet Style Anchor Points, Hose Restraint at Rear
  • Embossed 3/16-inch Aluminum Treadplate Rear Tailboard, with Stainless Steel Understructure
  • Integral Chassis Frame Rail Tow Eyes, Stainless Steel Tubular Body Subframe, Under-Floor Supports
  • 12-Gauge 304-Stainless Steel Fabricated Apparatus Body and Compartments, all-Bolted Construction
  • Eight (8) Fully Enclosed Driver & Officer Side Compartments, with Painted Locking Style Roll-Up Doors
  • Compartments: Filtered Vents, Adjustable Shelf Brackets, Door Bundle Encapsulators, Pull-Down Door Straps
  • Two (2) Heavy Capacity Roll-Out Aluminum Floor Trays, one (1) Adjustable Height Roll-Out Tray, Tray Tiles
  • Five (5) Adjustable Height Heavy Capacity Compartment Shelves, Shelf Tiles, Enclosed Escaped Cylinder Cubby
  • Two (2) Fully Enclosed Sleeve Style Hard Suction Hose Compartments, with Trays for 6-inch Suction Hose
  • Four (4), 2-SCBA Bottle Compartments, located in 2-each Driver and 2-each Officer Side Wheel Well Housings
  • One (1) Wheel Chock Compartment, located in Driver Side Wheel Well Housing, for 2-Non-Foilding Large Chocks
  • One (1) Extinguisher Compartment, located in Officer Side Wheel Well Housing, for 2-Dry Chem Extinguishers
  • Ten (1) Folding Steps, located: 2-each Driver and Officer Front Body Corners, 6-each Rear Driver-Officer Sides
  • One (1) Embossed 3/16-inch Aluminum Treadplate Intermediate Body Height, Rear Full Width Step

 

12-VOLT APPARATUS ELECTRICAL SYSTEM, NON-EMERGENCY ELECTRICAL FIXTURES

  • Thermal Imager, Bullard T4MAX, with Mounting and Battery Charger Wired to “Hot” to Vehicle 12-Volt System
  • Power Distribution Center, for Apparatus 12-volt Electrical Circuits, Components, and Fixtures
  • Surface Illumination, LED Fixtures: Runningboards, Tailboard, Walkway, Rear Intermediate and Folding Steps
  • Ground Lights, LED Beneath: Chassis Cab Doors, Mid-Ship Control Module, Apparatus Body Sides, Rear Tailboard
  • DOT Lighting, LED: Tail, Turn, Back-Up, Rear Marker, Side Marker, Upper Level Marker, Mid-Turn/Marker
  • 360-degree Color Camera System, one (1) Large Color Monitor, five (5) High Resolution Cameras
  • LED Scene Lighting (in addition to Chassis Scene Lighting): Four (4) SPA-260-Q15 2-per Side, two (2) SPA900 Rear

 

12-VOLT APPARATUS EMERGENCY WARNING LIGHTING

  • LED Emergency Lighting (in addition to Chassis Emerg Lighting): B, C & D Upper & Lower Whelen M6 Super LED

 

LINE VOLTAGE ACCESSORIES

  • 120-volt Shoreline, Kussmaul 20-Amp Super Auto Eject
  • 120-volt Gast Onboard Air Compressor
  • 120-volt Onboard Powermax Automatic Battery Charger

 

LETTERING, STRIPING, AND GRAPHICS

  • Ten (10) each 10-inch Black Scotchlite Letters
  • Twenty (20) each 6-inch Red & Blue Scotchlite Letters
  • Eight (8) each 24-inch Blue and Multi-Color Letters
  • Two (2) each, American Flag Emblems
  • Double Reflective Hockey Stick Stripes, Full Length of Apparatus, Driver & Officer Sides, 6” Red over 1” Black
  • Forty-Two (42) square feet, Solid Red/Florescent Yellow-Green Reflexlite Chevrons