Factory Floor

INDUSTRIAL FOAM PUMPER

Custom Build for IMTT - Bayonne, NJ

3000 GPM Water Flow
300 GPM Foam Flow
1000 Gallon Concentrate Tank

Bulletpoint Specs

Truck Type: Industrial Pumper

Chassis Model

SPARTAN FC-92 CUSTOM CHASSIS, MEDIUM 4-DOOR CAB WITH 10” RAISED ROOF

  • Four (4) Cab Entry Doors, Barrier-Free Front and Rear
  • Exterior Cab RED, Sikkens FLNA-3047, Single Color
  • 12-Volt DC Multiplex Chassis Electrical System with Weldon MUX Data Recorder, 1-Year Warranty
  • Cummins Diesel Engine, L9 450 HP @ 2100 RPM, 1250 Ft. Lb. @ 1200 RPM 2200 Governed Speed
  • Engine Exhaust Diesel Particulate Filter (DPF), Outlet Ahead of Right Rear Wheels
  • Auxiliary Engine Brake VG-Turbo with On/Off Control on Dashboard
  • NFPA Compliant Ember Screen Air Intake, Replaceable Dry Style Air Filter Element, Air Restriction Gauge
  • Variable Speed Engine Fan Drive Thermostatically Controlled, Extended Life Coolant
  • Electronic Low Level Indicator, Silicone Coolant Hoses, Overflow Expansion Bottle, Engine-Pump Heat Exchanger
  • Right Hand Horizontal Exhaust, Aftertreatment Emissions, 6-Gallon DEF Fluid Tank with Level Indicator
  • Engine Exhaust Wrap, Exhaust Emissions 5-Year Warranty, Right Hand Horizontal Tailpipe-Outboard Exhaust
  • Allison 3000-EVS 6-Speed Automatic Transmission with 2- PTO Provisions, Electronic Push-Button Shift Pad
  • Electronic Transmission Fluid Level Indicator, Transmission Cooling System, Allison 5-Warranty, Spicer 1710 Driveline
  • Fuel Filter with Water Separator-Light and Alarm, Electric Fuel Primer, 50-Gallon Diesel Fuel Tank, LH Fill Port
  • Meritor MFS 21,500 lb. Beam Front Axle, Oil Lubricated Front Bearings, Front Shocks, 10-Leaf Suspension
  • Tilt/Telescopic Steering Column, 18” Steering Wheel, Electronic Fluid Level Indicator, TRW Power Steering Pump
  • Front Axle Cramp Angles 48L/44R TAS-65 Power Assist, Chassis Alignment
  • Meritor RS-30-185, 33,000 lb. capacity Rear Axle, 5.13 Ratio for 68-MPH, Reyco 79KB Spring w/Helper Suspension
  • Two (2) each Michelin X-Multi HLZ 385/65R22.5 Front Tires, Four (4) 315/80R-22.5 Michelin XDN2 Grip Rear Tires
  • Two (2) Front 22.5×12.25 and Four (4) Rear 22.5×9 Alcoa 10-Hole Hub Piloted Polished Outer Aluminum Wheels
  • Brake System ABS/ATC/ESC Single Axle, S-Cam Drum Brakes 16.5×6 Front 16.5×8.6 Rear Cast Shoes
  • Park Brake Rear Wheels Only, Meritor Front and Haldex Rear Slack Adjusters, Brake Chambers MGM-30 & TSE 30/36
  • Wabco 1200 System Saver Air Dryer, Wabco 18.7 CFM Air Compressor Remote Air Governor, Manual Ejectors
  • Wheelbase to be 245”, Double Channel Hot-Dipped Galvanized Frame Rails, 5-Yr Structural/10-yr Corrosion Warranty
  • Polished Stainless Steel Flat Front Bumper, Bumper Extended 24” Ahead of Cab
  • Two (2) 21” Hadley Round E-Tone Air Horns, Recessed Behind Bumper Face RH & LH Inboard Rails
  • 1200 cu. In Air Horn Reservoir, Cast Products 100-Watt Speaker RH Outboard Front Bumper Face
  • Two (2) Below Frame Painted Front Tow Hooks, Electric-Over-Hydraulic Cab Tilt System with Down-Locked Indicator
  • 2-Piece Front Cab Windshield, Tinted Side Window Glass, 12V Electric Powered Door Window Glass
  • Mid-Cab Side Windows, Tinted Automotive Green Glass 16”W x 26” H
  • Heater, Defroster, and Air Conditioner HVAC Dash Controls with Recirculating Switch, Exterior Roof Condenser
  • Silver Gray Interior Vinyl Trim, Interior Cab Grab Handles Vertical at Front Doors, Horizontal at Rear Doors
  • Gray Seating Material with Contrasting Red Seat Belts, 4-Way Air Ride Driver Seat, 2-way SCBA Officer Seat
  • Two (2) Rear-Facing Outboard Mid-Cab C Firefighter Crew Seats, SCBA style with SecureAll Brackets
  • Two (2) Forward-Facing Inboard Rear of Cab Firefighter Crew Seats, SCBA style with SecureAll Brackets
  • Four (4) Exterior Cab Stainless Grab Rails, Heated Retrac West Coast Mirrors, Polished Aluminum Front Fenders
  • Keyless Ignition, Three (3) Group 31 12Volt Batteries, Remote Jumper Stud, Leece Neville 320-Amp Alternator
  • Kussmaul Auto Charge 40 Line Voltage-12Volt Battery Charger with Display, 120V Auto Eject Shore Receptacle
  • Four (4) LED Front Headlamps, K60 LED Arrow Turn Lamps, S-170 LED Side and Roof Marker and ICC Lights
  • Interior Cab Overhead Red/Clear LED Lights, Open-Door Activated
  • Whelen Roof Mounted Freedom F4N72QLED Light Bar, 6R2C Layout-1 Configuration, Switch on Electrical Panel
  • Two (2) Whelen 900 12V Super 24 LED Clear Gradient Scene Lights on Upper Rearward Cab Sides
  • Four (4) LED Under Cab Ground Lights, Doorway Step Lights, and Intermediate Step Lights. LED  Engine Work Light
  • Two (2) LED Front Warning Lights, Two (2) LED Intersection Warning Lights, Whelen 295HFS2 Electronic Siren
  • AM/FM/WB Radio with Roof Antenna and Speakers, Rear View Camera Display on Cab Dashboard

Fire Pump System

INDUSTRIAL WATEROUS CRU2C21-3000-GPM PUMP / 300-GPM ULTAFLOW FOAM TOP-MOUNT MODULE

Brushed Stainless Steel “fabricated bolted assembly” Full Width Top-Mount Pump Module
Speed-Lay Hose Bed with Two (2) Removable Poly Hose Trays
Brushed Stainless Steel Runningboards, Operator’s Walkway & Intermediate Steps ALL with Non-Slip Surfaces
Mansaver Padded Bars, Knurled Stainless Steel Vertical and Horizontal Handrails
Waterous CRU-2, 3000-gpm Industrial Fire Pump, with C-23 Extra Heavy Duty Chain-Drive Transmission
Waterous Pneumatic Pump Shift, with Cab Dashboard Remote Shift Control Console
Dual (2) Bronze Pre-Set Suction Manifold Intake Relief Valves
FRC Engine Electronic Pressure Governor with Digital Engine Instrumentation
Trident Dual (2) Dual-Barrel Auto-Air-Primers
2-Intake Manifold Zinc Anodes, 2-Discharge Manifold Zinc Anodes
Waterous Pump Overheat Protection, Pump Cooling System
ELECTRIC: Akron Hose Line Discharge Valves, Akron LDH Discharge Valves, TFT Remote-Controlled Inlet Valves
Fire Pump 10” Victaulic Suction Inlet, Stainless Steel Rams-Horn Suction Intake Manifold, LH & RH Intakes
Four (4) 6” NSTM Suction Intake Nipples with Removable 6” Zinc Strainers, Two (2) Each Side
Four (4) TFT 6” NSTFM x 6” Storz 12V Electric Remote-Controlled Jumbo Ball Valves with 30-degree Capped Inlets
Two (2) 2-1/2” Ball Valve Auxiliary Suction Intakes, with NST Swivel Female Inlets with Plug Caps, One (1) Each Side
Fire Pump 6” Flanged Discharge Outlet, Stainless Steel Contour-Flow Manifold with Discharge and Monitor Ports
Stainless Steel Discharge Waterways to Handlines, LDH Discharges, Deck Guns, and Overhead Monitor
Waterous Aquis UltraFlow, 300-gpm Flow-Based Direct Discharge Injection Industrial Foam System
Trident 300-GPM Rotary Gear Hydraulic Motor-Driven Foam Pump, Hot-Shift PTO-Driven Hydraulic Pump
Eleven (11) Operator’s Panel Mounted 12V Akron Navigator PRO Discharge Valve Controllers, with Digital PSI
Two (2) Analog Liquid-Filled 1-Master Intake & 1-Duplex Foam/Water Pressure Gauges
Operator’s Panel Mounted Daylight Readable Tellurus HMI Touchscreen Control Display Panel Foam Control
13-Foam Solution Capable Discharges, 12V Akron Electric Ball and Butterfly Style Valves:
3-3” Handline Discharge Outlets, 2-1/2” NST: 1-Bumper Jump Line, 2-Rear
3-6” LDH Outlets, 6” NST: 2-Driver Side, & 1-Passenger Side
2-6” Combo Discharge Outlet/Deck Gun Discharge/Rear Inlets, 1-Left & 1-Right at Rear of Apparatus
1-8” Discharge to Monitor Overhead the Pump Module
2-4” Discharges to Rear Top Deck Guns (Dual Feed Sources: Fire Pump Foam Capable-and-Rear 6” Inlets)
2-2” Speed-Lay Preconnected Hand Lines, 1-1/2” NST
One (1) 4” Concentrate Tank-to-Concentrate Pump, “B”-Valve
One (1) 2” Concentrate Pump-to-Concentrate Tank, “A” Valve
One (1) 2-1/2” NST Foam Pump Concentrate Gated Inlet, Driver Side “S” Valve
One (1) 2-1/2” NST Foam Pump Concentrate Gated Off-Board Outlet, Passenger Side “T” Valve
One (1) 2” Water Tank to Foam Pump Gated “Flush” Line
One (1) Williams Ambassador 6000-gpm HydroFoam, Overhead Pump, Electric Remote + Manual Crank
Two (2) TFT Monsoon 2000-GPM Deck Guns at Rear Top Body Corners, Wireless Remote Controls
Vehicle Specific Color Power Point Training Presentation, Provided on Delivery Fire Pump and Foam System
Hands-On Training and Vehicle Demonstrations, at Purchaser’s Location, Multiple Days-On Site


WATER TANK

500-gallon Water tank with Fill Tower, located beneath Hose Bed
Stainless Steel Neoprene Rubber Lined Foam/Water Tank Cradle, Lifetime Warranty
Water Level Indicator: Operator’s Panel
3” Foam Water Tank-to-Fire Pump Valve with Stainless Piping
Maintenance Concentrate Blocking Valve
2” Water Pump-to-Water Tank Fill Discharge

Booster Tank

FOAM CONCENTRATE TANK

700-gallon Foam Concentrate tank with NFPA foam expansion Fill Tower, located beneath Hose Bed
Stainless Steel Neoprene Rubber Lined Foam/Water Tank Cradle, Lifetime Warranty
Foam Concentrate Level Indicators: Operator’s Panel and, 2-MAXVISION Strip Lites on Pump Module Sides
4” Foam Concentrate Tank-to-Foam Pump Valve with Stainless Piping
Maintenance Concentrate Blocking Valve
2” Foam Pump-to-Foam Concentrate Tank Fill Discharge

Special Features

INDUSTRIAL FOAM PUMPER CHASSIS ENHANCEMENTS

NFPA Roll-Over Stability Tilt-Table Test, NFPA Placards and Warning Labels
Emergency Air Intake Shut-Off Valve
Coolant Boost Pump, for Auxiliary Pump Module Heater
Folding Wheel Chocks with Under-Body Brackets
Chassis Heavy Duty Driveline Joints for Midship Mounted Split-Shaft Pump Transmission
Hot-Shift PTO with Spicer Driveline, to Power Foam System Remote Mounted Hydraulic Pump
Mud Flaps Front and Rear, Left and Right Sides, NFPA Noise Level Testing