Factory Floor

INDUSTRIAL 4 FOAM PUMPER TENDER

Custom built for the Refinery Terminal Fire Company (RTFC)

Sold by Custom Fire Apparatus, Inc.

Bulletpoint Specs

Truck Type: INDUSTRIAL FOAM PUMPER-TENDER

Chassis Model

PDF Drawing

INDUSTRIAL FOAM PUMPER-TENDER: CUSTOM MONARCH CHASSIS  

  • 100,000 psi 2-Channel Tandem Chassis Frame Rails, Domex Coated, 253” Wheelbase, Tow Eyes below Bumper
  • Cummins ISX-15, 600 HP Diesel Engine, with Jacobs Engine Brake, Primary and Secondary Fuel Filters
  • Top Air Intake with Ember Separator, Emergency Engine Shut-Down w/Reset
  • Ross TAS-85 Power Steering, Spicer SPL250 Severe Capacity Driveline, Tandem
  • Allison GEN-5 EVS4000 Automatic Transmission, Touch-Pad Shifter, Transmission Cooler, TRANSYND Fluid
  • Radiator Cooling Pressurized System for ISX15, Coolant Recovery, Fan Clutch, and Fire Pump Heat Exchanger
  • 100-Gallon Stainless Steel Fuel Tank, Fuel Cooler, Remote Vented Fuel Fill, DEF Tank with Access Door
  • 420-Amp Delco-Remy Alternator, six (6) Type 31 MHD Interstate 12-volt Batteries
  • Dana EFA245T, 25,500 lb. capacity Tubular Front Axle, Enhanced 25,500 lb. Front Suspension
  • Michelin 445/65R22.5 XZY3 Front Tubeless Front Tires, 6” Front Meritor Cam Air Brakes
  • Meritor RT-60-180, 58,000 lb. 5.38:1 Ratio Tandem Rear Axles
  • Raydan 62,000 lb. capacity Air-Ride Rear Suspension, 8.625” Rear Meritor Cam Air Brakes
  • Michelin 315/80R22.5 X-Multiway 3D XZE Tread Tubeless Tires, 10-Tire Pressure Monitoring System
  • Alcoa Aluminum Polished Wheels, Durabrite. Rear WR, 25,500 lb. Front WR, Hub & Lug Nut Covers
  • Air Brake System WABCO 6-Tanks, 1200 Air Dryer, 6-Channel Anti-Lock, Electronic Stability Control System
  • 98” wide x 141” long (73” aft) 4-Door, 15” Raised Roof Custom Chassis Cab, w/Structural Integrity Certification
  • 3/16” thick aluminum cab construction Hydraulic “Full-Tilt”, Manual Back-up, underside box tube sub-frame
  • Full Length Cab Doors, Manual Roll-Down Door Windows, Four (4) Auxiliary Cab Treadplate Aluminum Steps
  • Mid-Cab Side Sliding Windows, Synchronized-Intermittent Windshield Wipers,
  • Knurled Stainless Handrails: 4-Exterior Cab Sides w/Coat Hooks, Below Windshield, Interior Front & Rear Doors
  • Lang Merka 300-series Heated & Remote-Controlled Door Mounted Mirrors, Mirror Finish Stainless Front Grille
  • Front Bumper, Wrap-Around Polished Stainless Steel, Extended 24-inches ahead of Cab w/4-way Gravel Shield
  • Full Width Storage Well w/3-Deep Compartments, 1” Perimeter Lip and Hinged 2” High 4-way Aluminum Lid
  • Dual Grover 2040 Rectangular Air Horns Inboard Bumper, Activated Steering Wheel Button & Officer Dash
  • Whelen 295HFS2 Electronic Siren/PA, Two (2) Cast Products SA4201-68-A Electronic Speakers Inboard Grille
  • Federal Q2-B Flush Grille Mounted Mechanical Siren, Activated Officer Dash
  • LED Front Headlights, Recessed into Combination Headlight/Emergency Light Stainless-Steel Housings
  • Whelen 400-series LED Front Turn Lights, 500-series LED Cornering Lights, Headlights Alternating Flasher
  • Cab Exterior: Mirror Finish Stainless Steel Scuff Plates. Aluminum Treadplate Rear Cab Wall
  • Cab Interior: Brushed Stainless Steel Interior Door Panels, Multispec Gray Speckle Paint, Gray Rubberized Floor
  • Full Size Engine Enclosure for ISX15, Scorpion Black Urethane Coated, Top Center Console w/Map Book Storage
  • 12-Volt Electrical System Hard-Wired, Door Ajar Warning Light in Cab, High-Idle Switch, Multiple Power Points
  • Vehicle Date Recorder, Accessory Fuse/CB Panel, Power & Ground Studs, Interior Clear/Red Ceiling Lights
  • Severe Climate Heater, Air Conditioning, Defrosters with Full Windshield Ductwork
  • Air Ride Driver Bucket Seat, Air Ride Officer SCBA Bucket Seat, Three (3) Crew SCBA Fixed Bucket Seats
  • Bostrom Secure-All SCBA Seat Brackets, 4-each, Seat Belt Warning System, Rolltek Side Curtain Airbags
  • Mid-Cab Interior Overhead Storage Cabinet with Lift-Up Doors D-Ring Latches, for 15” Raised Roof
  • Rear-Cab Back Wall Full Height Cabinets, each side and overhead of Center Crew Seat
  • Jensen Stereo HD AM/FM/WB Radio with CD Player, Multiple Front & Rear Ceiling Speakers
  • Special Lighting: Under-Cab Ground Lights, Whelen Freedom 14-LED Lightbar, Six (6) M6 LED Warning Lights
  • FRC Spectra 20,000 Lumens 2-each Upper Side Scene Lights, FRC Spectra 20,000 Lumens 1-each Brow Light
  • FRC MAX Vision Tank Level Gauge LED Lights, Driver and Officer Upper Rear Sides of Cab
  • Two-Tone Cab Paint with Special Break Line

 

INDUSTRIAL FOAM PUMPER-TENDER CHASSIS MODIFICATIONS

  • Accommodations for and Mounting of Cab Tilt Controls and Signage (Mid-Ship Control Module)
  • Shore Air Inlet/Outlet Couplers, Air Pressure Gauge, and Enclosure with Access Door (Mid-Ship Control Module)
  • Additional Air Tank Reservoir for High Capacity Air Primer System
  • Air Tank Bleed Panel with Manual Drain Valves and Tubing for Seven (7) Air Tanks
  • Engine Exhaust Outlet Configured for Plymovent Exhaust Extraction System
  • Remote Stainless-Steel Fuel Fill Cubby Body Rear Wheelwell Housing with Access Door
  • Chassis Spicer Driveline Modifications to Accommodate Mid-Ship Fire Pump Split-Shaft Transmission
  • Hot-Shift PTO with Spicer Driveline extending to Power Foam System Remote Mounted Hydraulic Pump

 

INDUSTRIAL FOAM PUMPER-TENDER: REAR PUMP MODULE AND MID-SHIP CONTROL MODULE

  • Waterous CRU-2 4000-GPM Rear-Mounted Fire Pump with Inducer Impeller
  • Waterous TC-21 Chain Style Mid-Ship Mounted Fire Pump Split-Shaft Transmission
  • Pneumatic Fire Pump Shift with Remote Cab Controls and Mid-Mount Control Module Override
  • Master Rotary Pump Drain, Lift-Up Bleeders and Drains for Suctions, Discharges, and Foam Manifold
  • Two (2) Suction Manifold Pre-Set Bronze Intake Relief Valves
  • Electronic Engine Governor for Pump Pressure Control, w/Digital Engine Instrumentation
  • Stand-By Dual (2) Discharge Pressure Relief Valves w/Pressure Single Control and Stand-By Electronic Throttle
  • Auto Air-Prime System, Three (3) each 2-Barrel Venturi’s and an auxiliary air reservoir
  • Overheat Protection Manager, Pump Cooling System
  • Stainless Steel 12-inch Tubular Pump Suction Manifold with Three (3) Zinc Anodes
  • Three (3) 8-inch Pump Suction Intakes, reduced to 6-inch NST Male Fittings with Stainless Steel Strainers’
  • Three (3) TFT 12-volt Jumbo Ball Intake Valves, with Intake Relief Valves and Remote-Control Consoles
  • One (1) 2.5-inch Ball Gated Pump Suction Inlet
  • Water Tank-to-Pump Remote-Controlled Ball Gated Suction with one-way Check Valve, 500-GPM capability
  • 2-inch 12-volt Pump-to-Tank Ball Valve Gated Water Tank Refill, Remote-Controlled
  • Pump Cooling Discharge to Water Tank, Remote-Controlled 3/8-inch Solenoid Valve
  • Stainless Steel 10-inch Tubular Pump Discharge Manifold with Two (2) Zinc Anodes, Two (2) 8-inch Branches
  • Stainless Steel 10-inch Monitor Waterway with 8-inch 12-volt Butterfly Gate Valve, Remote-Controlled
  • Williams Ambassador 6000-GPM Hydra-Foam/Hydra-Chem Mid-Ship Monitor, Hydraulic Remote-Controlled
  • Two (2) 2.5-inch Foam Capable Discharges, 1-Driver & 1-Officer Side, 12-volt 3.5-inch Remote-Controlled Valves
  • Two (2) 5-inch Foam Capable Discharges, 1-Driver & 1-Officer Side, 12-volt 5-inch Remote-Controlled Valves
  • Two (2) 6-inch Foam Capable Discharges, 1-Driver & 1-Officer Side, 12-volt 6-inch Remote-Controlled Valves
  • Two (2) 1.5 NST Foam Capable Mid-Ship Speed-Lay Discharges, 12-volt 2.5-inch Remote-Controlled Valves
  • One (1) 2.5 NST Foam Capable Mid-Ship Speed-Lay Discharge, 12-volt 2.5-inch Remote-Controlled Valve
  • One (1) 2.5 NST Foam Capable Front Bumper Extension Discharge, 12-volt 2.5-inch Remote-Controlled Valve
  • AccuMax-3300, Electronically Controlled Multi-Point Direct-Injection, 300-GPM Foam System w/Low-Flow
  • Stainless Steel Foam Suction and Discharge Manifolds, 6-inch Stainless Steel Foam Concentrate Strainer
  • Line Control High-Pressure Hose Assemblies, Hydraulic Servo-Controlled Foam Pump Drive with Oil Cooler
  • Two (2) 3-inch Foam Pump Gated Suctions, 1-Driver & 1-Officer Side, 2.5-inch NST Swivel Female Fittings
  • 300-GPM Foam Tank-to-Foam Pump Ball Gated Suction, with Maintenance Blocking Valve
  • 300-GPM Foam Pump-to-Tank Fill with Maintenance Blocking Valve, Combo Offboard Gated Discharge
  • One (1) Master Control Display, Ten (10) Digital Line Control Displays, Manual Override, Low-Flow Option
  • Mid-Ship Top-Mount Pump Control Module, Dual Access Transverse Walkway with Operator’s Bench Seat
  • Transverse Stokes and Hose Bundle Compartments, Driver & Officer Side Equipment Compartments
  • Three (3) Transverse Speed-Lay Pre-Connect Hose Bed Cavities w/Removable Poly Cartridge Hose Beds
  • Full Width Rear-Facing Top-Mount Pump Control Console and Instrument Panel, Standby Controls Cubby
  • Digital and Analog Discharge Line Instruments/Gauges, Analog Master Suction and Duplex Foam/Water Gauges
  • Three (3) 12-volt Power Distribution Panels: 2- Rear Water & Foam Pumps, and 1-Mid-Ship Electronics
  • LED Water Tank Level Indicator, LED Foam Tank Level Indicator, Two (2) LED Strip Light Foam Level Light Fixtures
  • Diesel Fuel Level Gauge, Air Horn Switch, and Color-Coded Gauge Bezels and Control Name Plates

 

 

 

 

INDUSTRIAL FOAM PUMPER-TENDER: FOAM AND WATER TANKS

  • Poly 2400-Gallon Combination Foam/Water Tank, 2000-Gallons Foam and 400-Gallons Water Capacities
  • L-Shape Tank for Reduced Height Hose bed, Horizontal Sleeve Through Tank for 10-inch Monitor Waterway
  • One (1) 2.5-inch NST Swivel Female Gated Direct Foam Tank Bottom Fill, 12-volt 2.5-inch Remote-Controlled
  • Stainless Steel .5-inch Neoprene Rubber Lined Foam/Water Tank Cradle

 

INDUSTRIAL FOAM PUMPER-TENDER APPARATUS COMPARTMENTED BODY, TANDEM STYLE

  • Tandem Axle 3-Segment Pumper Tender Industrial Fire Apparatus Body, Compartmented with Hose Bed
  • Hose Bed Area, located To Rear of and Overhead the Foam/Water Tank, Aluminum Floor Gratings
  • Four (4) .250-inch Plate Aluminum Adjustable Hose Bed Dividers, with Laser-Cut Hand Holds
  • Double-Panel Natural Finish Brushed Stainless Steel Hose Bed Risers/Body Side Panels
  • Hose Bed Fall Arrest System with Six (6) Pivoting Slip-In Eyelet Style Anchor Points, Hose Restraint at Rear
  • Embossed 3/16-inch Aluminum Treadplate Rear Tailboard, with Stainless Steel Understructure
  • Integral Chassis Frame Rail Tow Eyes, Stainless Steel Tubular Body Subframe, Under-Floor Supports
  • 12-Gauge 304-Stainless Steel Fabricated Apparatus Body and Compartments, all-Bolted Construction
  • Eight (8) Fully Enclosed Driver & Officer Side Compartments, with Painted Locking Style Roll-Up Doors
  • Compartments: Filtered Vents, Adjustable Shelf Brackets, Door Bundle Encapsulators, Pull-Down Door Straps
  • Two (2) Heavy Capacity Roll-Out Aluminum Floor Trays, one (1) Adjustable Height Roll-Out Tray, Tray Tiles
  • Five (5) Adjustable Height Heavy Capacity Compartment Shelves, Shelf Tiles, Enclosed Escaped Cylinder Cubby
  • Two (2) Fully Enclosed Sleeve Style Hard Suction Hose Compartments, with Trays for 6-inch Suction Hose
  • Four (4), 2-SCBA Bottle Compartments, located in 2-each Driver and 2-each Officer Side Wheel Well Housings
  • One (1) Wheel Chock Compartment, located in Driver Side Wheel Well Housing, for 2-Non-Foilding Large Chocks
  • One (1) Extinguisher Compartment, located in Officer Side Wheel Well Housing, for 2-Dry Chem Extinguishers
  • Ten (1) Folding Steps, located: 2-each Driver and Officer Front Body Corners, 6-each Rear Driver-Officer Sides
  • One (1) Embossed 3/16-inch Aluminum Treadplate Intermediate Body Height, Rear Full Width Step

 

12-VOLT APPARATUS ELECTRICAL SYSTEM, NON-EMERGENCY ELECTRICAL FIXTURES

  • Thermal Imager, Bullard T4MAX, with Mounting and Battery Charger Wired to “Hot” to Vehicle 12-Volt System
  • Power Distribution Center, for Apparatus 12-volt Electrical Circuits, Components, and Fixtures
  • Surface Illumination, LED Fixtures: Runningboards, Tailboard, Walkway, Rear Intermediate and Folding Steps
  • Ground Lights, LED Beneath: Chassis Cab Doors, Mid-Ship Control Module, Apparatus Body Sides, Rear Tailboard
  • DOT Lighting, LED: Tail, Turn, Back-Up, Rear Marker, Side Marker, Upper Level Marker, Mid-Turn/Marker
  • 360-degree Color Camera System, one (1) Large Color Monitor, five (5) High Resolution Cameras
  • LED Scene Lighting (in addition to Chassis Scene Lighting): Four (4) SPA-260-Q15 2-per Side, two (2) SPA900 Rear

 

12-VOLT APPARATUS EMERGENCY WARNING LIGHTING

  • LED Emergency Lighting (in addition to Chassis Emerg Lighting): B, C & D Upper & Lower Whelen M6 Super LED

 

LINE VOLTAGE ACCESSORIES

  • 120-volt Shoreline, Kussmaul 20-Amp Super Auto Eject
  • 120-volt Gast Onboard Air Compressor
  • 120-volt Onboard Powermax Automatic Battery Charger

 

LETTERING, STRIPING, AND GRAPHICS

  • Ten (10) each 10-inch Black Scotchlite Letters
  • Twenty (20) each 6-inch Red & Blue Scotchlite Letters
  • Eight (8) each 24-inch Blue and Multi-Color Letters
  • Two (2) each, American Flag Emblems
  • Double Reflective Hockey Stick Stripes, Full Length of Apparatus, Driver & Officer Sides, 6” Red over 1” Black
  • Forty-Two (42) square feet, Solid Red/Florescent Yellow-Green Reflexlite Chevrons

Special Features

Adjustable Compartment Shelving
Pull-Out Compartment Trays
Removable Speedlay Hosebeds
Encapsulated Roll-Up Door Protection
Air Bag Storage Sleeve
Wheel Well SCBA Cylinder Storage

Emergency Warning Devices

LED Traffic Advisor
Whelen LED Lightbar
Whelen LED Warning Lights

Exterior Lighting

LED Step Lighting
LED Marker Lights
Under Chassis and Under Body Lighting
Fire Research LED Scene Lights
Fire Research Brow Light